|
|
GH01.0300
... GH05.0300 / GH02.0300 ... GH06.0300 Ø=3
mm. Engraving cutters, blanks, halfened. |
|
Solid
carbide engraving cutters. Blanks, one end or both ends split.
Halfening flat polished.
Engraving
tool, single
end split:
GH01: split length = 1.5 * D
GH03: split length = 2 * D
GH05: split length = 3 * D
(D = diameter) |
Engraving
tools, both
ends split:
GH02: split length = 1.5 * D
GH04: split length = 2 * D
GH06: split length = 3 * D |
|
|
|
|
|
GH01.0300... |
GH03.0300... |
GH05.0300... |
GH02.0300... |
GH04.0300... |
GH06.0300... |
|
|
|
|
|
|
Code |
Code |
Code |
Code |
Code |
Code |
GH01.0300.038 |
GH03.0300.038 |
GH05.0300.038 |
GH02.0300.038 |
GH04.0300.038 |
- |
GH01.0300.040 |
GH03.0300.040 |
GH05.0300.040 |
GH02.0300.040 |
GH04.0300.040 |
- |
GH01.0300.050 |
GH03.0300.050 |
GH05.0300.050 |
GH02.0300.050 |
GH04.0300.050 |
GH06.0300.050 |
GH01.0300.075 |
GH03.0300.075 |
GH05.0300.075 |
GH02.0300.075 |
GH04.0300.075 |
GH06.0300.075 |
Material:
All cutters with total length 38 mm: ATX11, a sub-micrograin material
used in pcb cutter industry. Unequalled toughness.
Other dimensions: K40, made in Germany, a superb material for general purposes.
Other grades available on request. |
How
to read the code: GH0n.0300.LLL
GH01...GH06 Type of cutter (see
above)
0300 diameter (3.00 mm)
LLL Total length of cutter
Other dimensions are available on request. |
|
|
Code |
Prices
Euro, VAT excl. |
1-4 |
5+ |
10+ |
20+ |
GH01.0300.038 |
5,60 |
5,15 |
4,70 |
4,48 |
GH01.0300.040 |
|
|
|
|
GH01.0300.050 |
|
|
|
|
GH01.0300.075 |
|
|
|
|
GH03.0300.038 |
7,00 |
6,44 |
5,88 |
5,60 |
GH03.0300.040 |
|
|
|
|
GH03.0300.050 |
|
|
|
|
GH03.0300.075 |
|
|
|
|
GH05.0300.038 |
|
|
|
|
GH05.0300.040 |
|
|
|
|
GH05.0300.050 |
|
|
|
|
GH05.0300.075 |
|
|
|
|
|
Code |
Prices
Euro, VAT excl. |
1-4 |
5+ |
10+ |
20+ |
GH02.0300.038 |
|
|
|
|
GH02.0300.040 |
|
|
|
|
GH02.0300.050 |
|
|
|
|
GH02.0300.075 |
|
|
|
|
GH04.0300.038 |
|
|
|
|
GH04.0300.040 |
|
|
|
|
GH04.0300.050 |
|
|
|
|
GH04.0300.075 |
|
|
|
|
GH06.0300.050 |
|
|
|
|
GH06.0300.075 |
|
|
|
|
|
|
|
|
Hint: Ready-to-use
engraving bits with other dimensions - or with alternative grinding
specifications (i.e.for engraving steel) - you can combine like this:
1) Raw cutter, i.e. halfened, i.e. GH01.0300.040
2) Grinding the tip, i.e. SF05.0300 (see "Grinding
tips") according to client's specification like
tip angle, relief angles and width.
3) Coating, if desired, i.e. CTIA.1.0300 (see
"Coating"). |
|
þ
= Standard article. Always shipped within one week. All prices are
charged with German VAT(19%) if the client resides
within the EC and has no VAT-ID number. |
You need bigger quantities? Ask for an individual offer. |
|
|
GIS
Gienger Industrie-Service
• Segantinistr. 5 • CH
- 8049 Zurich • Tel. /
Fax +41-(0)44-341 5028 •
mail: info@gis-tec.com
Warehouse EC • Weimarstr. 15 • D -
78532 Tuttlingen • Tel.
+49-(0)7461-162020 • Fax
162021 |
|
|
|