STANDARD BITS 
    Ø 3 mm                        
    Ø 4 mm                        
    Ø 6 mm                        
    Ø 1/8" (3.18 mm)         
    OTHER Ø                     
    "BOX BITS"                  
    PARALLEL BITS            
    SPECIAL SHAPES         
   
    "GRAVO"-TYPES  
    Ø 3.18 * 105 ... 130      
    Ø 4.36 * 155 ... 185      
    
    SERVICE   
    GRINDING TIPS           
    COATING                     
    
    
    
      
    
     
    
    
    
    
    
    
    
 
 
 
 
 
 
 
 
 
 
 
 
 Grinding engravers' tips
Tip of engraving tool
Grinding new tips onto blank cutters (halfened or quarter round) or resharpening dull or damaged tools.

According to our standard or to client's specifications.
  SF01
Grinding engraving tool, cylindrical flat
Cylindrical, flat
  SF03
Ginding engraving tools, cylindrical ball nose
Cylindrical, round
  SF05
Grinding engraving tools, conical (V-shaped)
Conical
  SF07
Grinding engraving cutters, conical rounded (ball nose)
Conical, rounded
 Code from Ø .. until Ø
 SF01.0300 0.00 ... 3.00  
 SF01.0600 3.01 ... 6.00  
 SF01.0800 6.01 ... 8.00  
 SF01.1000 8.01 ... 10.00  
 SF01.1200 10.01 ... 12.00  
 SF01.1400 12.01 ... 14.00  
 SF01.1600 14.01 ... 16.00  
 SF01.1800 16.01 ... 18.00  
 Code from Ø .. until Ø
 SF03.0300 0.00 ... 3.00  
 SF03.0600 3.01 ... 6.00  
 SF03.0800 6.01 ... 8.00  
 SF03.1000 8.01 ... 10.00  
 SF03.1200 10.01 ... 12.00  
 SF03.1400 12.01 ... 14.00  
 SF03.1600 14.01 ... 16.00  
 SF03.1800 16.01 ... 18.00  
 Code from Ø .. until Ø
 SF05.0300 0.00 ... 3.00  
 SF05.0600 3.01 ... 6.00  
 SF05.0800 6.01 ... 8.00  
 SF05.1000 8.01 ... 10.00  
 SF05.1200 10.01 ... 12.00  
 SF05.1400 12.01 ... 14.00  
 SF05.1600 14.01 ... 16.00  
 SF05.1800 16.01 ... 18.00  
 Code from Ø .. until Ø
 SF07.0300 0.00 ... 3.00  
 SF07.0600 3.01 ... 6.00  
 SF07.0800 6.01 ... 8.00  
 SF07.1000 8.01 ... 10.00  
 SF07.1200 10.01 ... 12.00  
 SF07.1400 12.01 ... 14.00  
 SF07.1600 14.01 ... 16.00  
 SF07.1800 16.01 ... 18.00  
Hint: Ready-to-use engraving bits you combine like this:
1) Raw cutter, i.e. halfened, i.e. GH05.0600.040
2) Grinding the tip, i.e. SF05.0600 (see "Grinding tips") according to client's specification like tip angle, relief angles and width.
3) Coating, if desired, i.e. CTIA.1.0600 (see "Coating").

  þ = Standard article. Always shipped within one week.  All prices are charged with German VAT(19%) if the client resides
  within the EC and has no VAT-ID number.

 You need bigger quantities? Ask for an individual offer.

 
GIS Gienger Industrie-Service • Segantinistr. 5 • CH - 8049 Zurich • Tel. / Fax +41-(0)44-341 5028 • mail: info@gis-tec.com
Warehouse EC • Weimarstr. 15 • D - 78532 Tuttlingen • Tel. +49-(0)7461-162020 • Fax 162021